Description
The MapMaster™ mini detects faults and locations of RJ45 network cables. Good terminations, causes of faulty and locations of cables are displayed on an LCD display. A set of five mapping remotes is included for locating cables terminated in wall jacks or patch panels. A built-in tone generator with 4 different tone combinations can be used with a tone probe to detect where a cable is routed and the location of the end of the cable.
Features:
- Detects Shorts, Opens, Miswires, Reversals, and Split-Pairs
- Built-in Tone Generator
- Map Multiple Locations
- Auto-off to Extend Battery Life
Application:
- Installation, troubleshooting, and maintenance on network cables
- Identify patch panel port where network cable is terminated
- Determine wiring condition
- Identify up to 5 network cable runs at a time
- Find and fix position of exposed or hidden cables
Specifications:
Dimensions: | 11.7 x 5.8 x 2.8 cm |
Weight: | 115 grams with battery and remote |
Operating Temperature: | 0°C to 50°C / 32°F to 122°F |
Storage Temperature: | -20°C to 60°C / -4°F to 140°F |
Humidity: | 10% to 90%, non-condensing |
Maximum Voltage between any two connectors pins without damage RJ Jack: | 66V DC or 55V AC |
Battery: | 6V alkaline batteries – 4 x LR44, |
Life Typical/Standby: | 3.5 years, Active: 80 hours |
Cable Types Shielded or Unshielded; | CAT7, CAT6a, CAT5e, CAT5, CAT4, CAT3 (4-pair only) |
Maximum RJ Cable Length | 305m |
Minimum Cable Length for Split Pair Detection | 0.5m |
Low Battery | Icon flashes when battery voltage falls below 6V |
Please also see our guide on How to Identify, Verify, and Test an RJ45 Pinout.