Theben HME 6 T KNX

Ref: 4930245


Code Description log-in log-in Quantity
KNX-0005 Theben HME 6 T KNX log-in log-in



  • 6-way heating actuator MIX2
  • With 6 temperature controllers (P/PI) for heating and cooling
  • Extension module MIX2
  • For upgrading to maximum of 18 channels
  • For controlling 6 thermal actuators 24 V – 240 V AC in 2 groups with 3 outputs and 450 mA each
  • (Due to the switch-on behaviour of the actuators, we recommend not to exceed a maximum load of 3×1 actuators 24 V AC or 3×5 actuators 230 V AC)
  • Short-circuit-proof and overcharge protected
  • Continuous or switching actuating value selectable
  • Valve protection function can be deactivated
  • With the modes: comfort, standby, night as well as frost/heating protection
  • Changeover to summer mode possible
  • Up to two extension modules MIX or MIX2 can be connected to one base module
  • Device and KNX bus module can be swapped independently of each other
  • Removable KNX bus module enables devices to be changed without reprogramming
  • Manual set-up and use of actuator is possible without KNX bus module
  • LED switching status display for each channel
  • Manual operation on device (even without bus connection)


Stand-by consumption ~0.2 W
Width 4 modules
Installation type DIN rail
Number of channels 6
Type of connection Screw terminals
Max. cable cross section Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Switching output Not potential-free
Output Triac, 0.45 A
Voltage output 24 V AC – – 240 V AC
Frequency output 50 – 60 Hz
Suitable for SELV Yes if all channels switch at SELV
Switching of various phases Possible
Ambient temperature -5°C … 45°C
Type of protection IP 20
Protection class II according to EN 60 669

KNX-0005_HME 6 T KNX_Operating instructions.pdf

KNX-0005_HME 6 T KNX_Manual.pdf

KNX-0005_HME 6 T KNX_Data sheet.pdf

You may also like…