Theben JMG 4 T KNX

Ref: 4930250

Code Description log-in log-in Quantity
KNX-0004 Theben JMG 4 T KNX log-in log-in

Product Description

Features:

  • 4-way blind actuator MIX2
  • Base module MIX2
  • Can be upgraded to maximum of 12 channels
  • For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
  • Up to 2 extension modules can be connected to a base module
  • Up to two extension modules MIX or MIX2 can be connected to one base module
  • Device and KNX bus module can be swapped independently of each other
  • Removable KNX bus module enables devices to be changed without reprogramming
  • Manual set-up and use of actuators is possible without KNX bus module
  • Free combination of switches, dimming, blinds and heating control as well as binary inputs
  • For controlling drives for blinds, shutters, sun and vision protection devices, skylights and ventilation flaps
  • Manual operation on device (even without bus connection)
  • LED Up and Down switching status display for each channel
  • Potential-free contacts for Up and Down per channel
  • Setting option for phase sequence and running time of device
  • Copy function for fast configuration

Specifications

Operating voltage KNX Bus voltage, <4 mA
Operating voltage 110 – 240 V AC 50 – 60 Hz
Stand-by consumption ~0.3 W
Capacity loss max. 2 W
Frequency 50 – 60 Hz
Number of channels 4
Width 4 modules
Installation type DIN rail
Type of connection Terminal screws | Bus connection: KNX bus terminal
Max. cable cross section Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm²
Output NO contact, 6 A
Switching output Potential-free, for SELV, if the whole device switches SELV
Ambient temperature -5°C … 45°C
Type of protection IP 20
Protection class II according to EN 60 669

KNX-0004_JMG 4 T KNX_Operating instructions.pdf

KNX-0004_JMG 4 T KNX_Manual.pdf

KNX-0004_JMG 4 T KNX_Datasheet.pdf